Finnish in the cold

[Jeremy Bracey]

I have recently completed moulding 650 linear feet of base moulding for the house I am breaking ground on in Feb. I am trying to get as much done ahead of time as possible.

SO... I have already stained and finnished (catalyzed laquer) most of the base board. My question is: after it has fully dried (at least 24 hours) can I store them in a cold enviournment or will this cause a problem for the finnish. I have a dry barn (insulated and drywalled, my future shop) that is empty, but also does not yet have power or heat.

Your thoughts are appreciated.

[Bruce Shiverdecker]

Since it (the FINISH) is already cured, it shouldn't be a problem.

However, the Finnish people from Finland are cold most of the time......BRRRRRRR! (hehe)

Just havin' some fun,
Bruce

[Ted Shrader]

Jeremy -

Since you already have the finish on and it has cured (assumlng someplace warm), storing in your future shop will not be a problem. When you finally get to bring it in for installation, let it acclimate a few days prior to installing it.

Ted