View Full Version : Sanding Belts
Steve Schlumpf
10-13-2010, 3:25 PM
I have one of those Ridgid oscillating sanding stations that uses 4" x 24" sanding belts. I can get larger grit sizes locally but would like to find an online source for belts with 220, 320 and 400 grits.
Any suggestions are appreciated!
Roger Newby
10-13-2010, 3:46 PM
Klingspor has them up to 320 grit.
www.woodworkingshop.com (http://www.woodworkingshop.com)
Bill LaPointe
10-13-2010, 4:02 PM
I have been buying belts and discs here for several years. Super service and prices.
http://barbkat.com/
Tom Esh
10-13-2010, 6:26 PM
I use these folks http://www.supergrit.com/
They also carry the zirconia belts which are really durable. They're especially nice at the lower grits if you're shaping or hogging off lots of material.
Curt Harms
10-14-2010, 5:48 AM
Here's another
http://www.industrialabrasives.com/industrial-abrasives-sanding-belts-c-73.html?zenid=95923c39248b584eb6bfbfe7a33e00fc
Steve Schlumpf
10-14-2010, 3:09 PM
Thanks for all the suggestions everyone - I appreciate it!
Ended up ordering from Industrial Abrasives (Thanks Curt!) as they are running a special of buy 12 - get 12 free and you can mix and match grits.
Thanks again!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.