PDA

View Full Version : SN2 Jaws


Andrew Kertesz
10-10-2010, 12:51 PM
Recently I saw a thread where someone had questions about the sizing and capacities of the jaws for SN2 chuck. Someone had given a great explanation and the sizes covered by the specific jaws. I can't seem to find that thread; does anybody have a link or know what thread it was?

Thanks,
Andy Kertesz
John Keeton
10-10-2010, 1:12 PM
Andrew, it may have been this one (http://www.sawmillcreek.org/showthread.php?p=1527508&highlight=nova+jaws#post1527508).
bob svoboda
10-10-2010, 2:31 PM
Look on 10/4 for a thread I started with that question. I got some great information.
John Keeton
10-10-2010, 6:34 PM
Look on 10/4 for a thread I started with that question. I got some great information.Bob, that was the link in my response, and I suspect that is the one to which Andrew is referring.
bob svoboda
10-10-2010, 6:51 PM
John, when I clicked your link it took me to another post. Maybe I clicked wrong? Anyway, I will gladly stand corrected.
John Keeton
10-10-2010, 6:57 PM
Bob, that was a link to the thread you started, but it probably opened to the last post. Didn't mean to sound like I was 'correcting', just trying to save you the effort of looking for the thread should you have been doing that. Sorry if it sounded differently!:o
Andrew Kertesz
10-10-2010, 7:46 PM
That was the link I was referring to, and yes it has some great information in the thread. Thanks to both of you....
bob svoboda
10-11-2010, 10:09 AM
Bob, that was a link to the thread you started, but it probably opened to the last post. Didn't mean to sound like I was 'correcting', just trying to save you the effort of looking for the thread should you have been doing that. Sorry if it sounded differently!:o
Got it, John. I should have explored more. No harm done!:)