Saul Levinson
10-07-2010, 5:00 PM
Well, I bought and installed the Exaktor EXOA-2. It was a hard decision as the Excalibur was also very nice and would meet the requirements I had. The installation was OK, but I had to make some modifications as the EXOA-2 requires a minimum space of 39 inches between the blade and the mounting of the vertical stack. My solution was to remount the horizontal stack using tube clamps. I also wanted to use the vacuum hookup on the bottom of the TS, so I put a diverter in the vacuum line (right side) so that my Grizzly dust collector pulls vacuum from both the top and bottom. Seems to work OK
Thanks for the input and advice.
(I was going to attach some photos, but I'm having some difficulty)
Saul
Thanks for the input and advice.
(I was going to attach some photos, but I'm having some difficulty)
Saul