PDA

View Full Version : Please help with rubber stamp



Juergen Zoissl
09-22-2010, 12:16 PM
Hello friends
Can anybody please make my file to laser it with lasercut on an rubber stamp.

Ive attached the file.
ive worked hard but it seems im to stupid to figure it out.

My Laser is an Rabbit HX 1290
Software Corel and Lasercut 5.3

rg
Juergen

Frank Corker
09-22-2010, 12:27 PM
This should do it.

Frank Corker
09-22-2010, 12:29 PM
The black background needs to be white with a fence. This tells the laser that only the black part is raised. The outer box becomes the cut line and has a hairline.

Juergen Zoissl
09-22-2010, 12:48 PM
Thank you Frank
And how much dpi, speed and power is needed.
80 Watt CO2 Tube is installed.
rg
Juergen

Juergen Zoissl
09-22-2010, 12:51 PM
Hello Frank
I ve another File.
It comes out as crap from the Laser.

No details inside the cross

Please correct the file.

Many thanks
Juergen

Dee Gallo
09-22-2010, 1:23 PM
Hello Frank
I ve another File.
It comes out as crap from the Laser.

No details inside the cross

Please correct the file.

Many thanks
Juergen

Juergen,

No offense, but you will never master your trade if you have others do your work for you. Frank has generously given you a sample and instructions - study and proceed! If you don't understand what you are trying to do, there is no point in doing it. Ask questions, yes! "please correct the file"? Sorry but that is just rude. He does not work for you.

Most of us have learned from trial and error. Don't expect it to be a press and play operation with so many variables. Take the time to learn your machine, its capabilities and your software.

~ dee

Pete Bejmuk
09-22-2010, 2:31 PM
some types of rubber don't hold detail well. try different rubber.

Juergen Zoissl
09-23-2010, 3:04 AM
Thank you for your help
I will try to make a rubber stamp with these files and your hints.

rg
juergen