bonding

[Don Necaise]

I am trying to bond rowmark onto a piece of acrylic and will be outside. Anyone have any ideas on whatwould be the best tape or adhesive to use?
Thanks

[Joe Pelonio]

Rowmark is acrylic too, just a different formulation. Weld-on works for that
as does E-6000. I have also used 3M 467MP film and it works fine outdoors here, but in sunnier hot summer climates may not last.

[greg lindsey]

I use 3M 465 2mil dbl sided tape, I purchase logs of it from Hisco in Houston, you can find them online, they custom cut it from 1/8" to 48" logs, will definately hold up outdoors.

[Frank Corker]

Double sided tape or a good contact adhesive/impact adhesive would also work well outside.

[Don Necaise]

thanks for the input guys.