View Full Version : bonding
Don Necaise
09-12-2010, 10:03 PM
I am trying to bond rowmark onto a piece of acrylic and will be outside. Anyone have any ideas on whatwould be the best tape or adhesive to use?
Thanks
Joe Pelonio
09-12-2010, 11:17 PM
Rowmark is acrylic too, just a different formulation. Weld-on works for that
as does E-6000. I have also used 3M 467MP film and it works fine outdoors here, but in sunnier hot summer climates may not last.
greg lindsey
09-13-2010, 9:19 AM
I use 3M 465 2mil dbl sided tape, I purchase logs of it from Hisco in Houston, you can find them online, they custom cut it from 1/8" to 48" logs, will definately hold up outdoors.
Frank Corker
09-13-2010, 10:47 AM
Double sided tape or a good contact adhesive/impact adhesive would also work well outside.
Don Necaise
09-16-2010, 12:42 PM
thanks for the input guys.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.