View Full Version : Sears Craftsman model # 113.298240 table Saw manufacture date?
Sean Rainaldi
09-02-2010, 6:35 PM
Hi,
We have an old 10" craftsman 1 hp table saw from my father in law who passed away long ago and were wondering if there is a way to determine the date of manufacture on this?
Thanks.
Will Overton
09-02-2010, 7:00 PM
Have you tried contacting Sears?
Ken Fitzgerald
09-02-2010, 7:04 PM
Sean,
Check this out: http://www.owwm.com/photoindex/detail.aspx?id=8778
Sean Rainaldi
09-02-2010, 7:05 PM
No not yet. I do have the serial # too, was wondering if there might be a web site out there somewhere where I could punch in model numbers and sn and maybe the date would come up, I have found several sites like that for other products over the years can't find one yet though.
Yeah I saw that site ken. Was wondering maybe these saws were made over a long period of time though,
Don Jarvie
09-02-2010, 9:23 PM
Look at OWWM.com and go to the WIKI page. Theres quite a bit of information on Craftsman there.
You may have to match up the saw to the pictures.
Gene Waara
09-02-2010, 9:33 PM
I have a 299040 that I bought new in 1976 or 77 when I worked at Sears part tiime as a tool salesman. I just bought a G690 and sold the CM to my BIL. Your saw is likely older given the model sequence.
Darryl Hazen
09-03-2010, 12:37 PM
I have the same model. According to the date on the manual it was manufactured in 1984. I have the manual in pdf format if you are interested. Send me a PM and I will email it to you.
glenn bradley
09-03-2010, 1:56 PM
The 113. indicates it is an Emerson Electric manufactured machine.
I have the same model. According to the date on the manual it was manufactured in 1984. I have the manual in pdf format if you are interested. Send me a PM and I will email it to you.
Bingo, its an 80's machine. Not bad little saws. I had one of Emerson's from the previous decade and my dad now runs it with all the after-market fix-ups I added that such a tool may require. They can be made quite serviceable.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.