alex grams
08-23-2010, 8:56 AM
I noticed last night my HTC-3000 mobile base is having an issue with one of the casters hitting the frame when it turns. I had this similar problem on the shopfox base, but had expected better quality from the HTC. Anyone else experience this problem? It looks like it hits at least 1/8-3/16" into the caster, whereas the other caster pivots normally and freely through 360 degrees of rotation.
Hopefully I can get hold of HTC to get a replacement corner/caster.
I have the GO634Z combination jointer/planer on the base, so around 600lbs, well within the rated capacity of the base
edit: bleh, meant htc 3000 for the title
Hopefully I can get hold of HTC to get a replacement corner/caster.
I have the GO634Z combination jointer/planer on the base, so around 600lbs, well within the rated capacity of the base
edit: bleh, meant htc 3000 for the title