PDA

View Full Version : shaping tool problem



sal shepherd
08-14-2010, 5:48 PM
Well I have another delima. I made a NFC champ plate and was able to get it right.Now that the file was deleted I have another project needing the same build. My problem is with shaping tools I think.

Each color will be vector cut out so there will be 3 peices. the 2 bigger peices need to be the same size. so they fit in blue frame. Is there a better program to do this project in?

sal shepherd
08-15-2010, 4:05 PM
Well I feel good after a lot of screw ups a lot of toturials. this is what I came up with. It isn't perfect but will do.