Philip Florio
08-14-2010, 1:24 PM
I'm trying to attach the Wixey Planer Digital Readout to my Jet 16-32 drum Sander. At Wixey's website {http://www.wixey.com/planer/fit/index.html#ryobi}they show earlier versions withPerformax name with slight differences in the sander.
So far I've tried 3 different methods to attach it. In these pictures you'll see the truss I've set up to hold the reader. The only thing I can attach to indicate the height are the motor mounts. But the problem is the long 'arms' to the reader cause the arm to give a little instead of lifting the reader.
If you have this sander and have a method could you share it.
Thanks
So far I've tried 3 different methods to attach it. In these pictures you'll see the truss I've set up to hold the reader. The only thing I can attach to indicate the height are the motor mounts. But the problem is the long 'arms' to the reader cause the arm to give a little instead of lifting the reader.
If you have this sander and have a method could you share it.
Thanks