View Full Version : epoxy powder coated knife
Matt Wheeler
08-10-2010, 10:02 AM
I recently had a customer come in wanting an epoxy powder coated knife blade engraved. I have both co2 and diamond drag capabilities, I was wondering if someone has had any experience with engraving through the epoxy powder coating
Mike Null
08-10-2010, 10:12 AM
The laser will do a very nice job. I take two passes.
Haven't tried diamond drag or rotary but my guess is that diamond drag would not work.
Gary Hair
08-10-2010, 11:58 AM
I have lasered powder coating as well, it turns out really nice. As Mike said, take two passes, the first to get 99% of the coating and the second to clean it up. I don't have drag capabilities but my guess is that it would have a tendency to chip the edges.
Gary
Matt Wheeler
08-10-2010, 2:37 PM
thanks, I'll give it a go then.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.