Replacement springs for a 42x saw set?

[Adam Woznicki]

I just scored a 42x saw set at the flea market this morning:D.

It's in decent shape, even has a bit of the decal left. The problem is... no springs.

Does any one have a good source for springs? Or can I just go up the the hardware store and try different springs.

[Jim Koepke]

I know my local ACE Hardware has a wide selection of springs. I do not know what size spring is needed.

You might head on down and see if they have something that will work.

jim

[Andrew Gibson]

I think Home Depot or Lowes also sells a box of assorted springs that could work. I think the box goes for about $5.

[Adam Woznicki]

ok, I guess I'll make the trip to the hardware store.

I really don't hold much hope for that. The springs for the 42x look unusual to me especially the smaller one. The small spring is much stiffer than the large one.

[Andrew Gibson]

Golly Now I'm going to have to look at my 42x and take a peek at the springs.