Karl Card
08-07-2010, 5:45 AM
I finally got around to making a jig for box joints. I feel it still needs cleaned up but at least the basic part of it even going together is there.
Plus I did not sand the wood down at all. I was in to big of a hurry to see if it was remotely going to work.
I also have included a pic of my table saw, pimped out with extra miter slides on each side and extra wing on each side to make for a poor mans table saw.
The other pic is of 4 cherry crotches I won off of ebay for 10 bucks a piece. The top one is starting to split but if it splits no more I still have a couple end tables or something out of it... if it splits to bad then I guess I will have some nice cherry bowls. I dont have weight on them at this moment because they are being moved...
Plus I did not sand the wood down at all. I was in to big of a hurry to see if it was remotely going to work.
I also have included a pic of my table saw, pimped out with extra miter slides on each side and extra wing on each side to make for a poor mans table saw.
The other pic is of 4 cherry crotches I won off of ebay for 10 bucks a piece. The top one is starting to split but if it splits no more I still have a couple end tables or something out of it... if it splits to bad then I guess I will have some nice cherry bowls. I dont have weight on them at this moment because they are being moved...