Nate Davey
08-05-2010, 8:49 PM
I bought a set for my Jet and installed them today. I like them a lot as my shop is not permanent and I have to move the lathe from time to time. Wheels are fixed and the pads screw down to raise the lathe up off the wheels. This is also how I level the lathe. Conveniently enough, they are painted Jet white. The set up raised the lathe about 3.5" which is a little high for me, but I was planning on buying some 3/4" horse stall matts to stand on so it should be just about right. Thanks for looking.