View Full Version : Epilog X Motor

Brian Robison
08-01-2010, 5:46 PM
Hi Folks,
Any idea on the cost of one?
I just replaced the mother board for 1k
Now this, ugh.


Bruce Volden
08-01-2010, 6:03 PM
I'm thinking $250. I lost my MOBO a couple of months back and Epilog wasn't certain of a board failure or the X servo so they sent both and had me swapping things around to prove the faulty component. IIRC the price was $250. I posted my problem on this forum if you want to research.


Steve Clarkson
08-01-2010, 7:52 PM
Brian, I just replaced mine last week. Send me a PM.

Jeanette Brewer
08-01-2010, 7:54 PM
X motor for Mini = $155.30

Brian Robison
08-01-2010, 8:26 PM
Thanks Jeanette,
I think I'll order one tomorrow and maybe one of those cables too.

Joe Pelonio
08-01-2010, 9:51 PM
I can't remember but if it was over $250 I would remember!

At least it was a pretty easy job to change out.The replacement was reinforced to last a lot longer, the original got a bent shaft from stress.

Dan Hintz
08-02-2010, 9:54 AM
the original got a bent shaft from stress.
I've had a few days like that...

Martin Boekers
08-02-2010, 1:49 PM
I think mine was about $150 but don't forget the core charge which you will get back when the core is sent in.


Bill Cunningham
08-03-2010, 9:47 PM
The 150 sounds about right.. I replaced mine last year (you can smell them cooking:D) But the shipping was $50.00.. Not complaining though, I called Epilog about 10am, and the part was in my machine by 1pm the following day, and I'm 3000 miles away..