Epilog X Motor

[Brian Robison]

Hi Folks,
Any idea on the cost of one?
I just replaced the mother board for 1k
Now this, ugh.

Brian

[Bruce Volden]

I'm thinking $250. I lost my MOBO a couple of months back and Epilog wasn't certain of a board failure or the X servo so they sent both and had me swapping things around to prove the faulty component. IIRC the price was $250. I posted my problem on this forum if you want to research.

Bruce

[Steve Clarkson]

Brian, I just replaced mine last week. Send me a PM.

[Jeanette Brewer]

X motor for Mini = $155.30

[Brian Robison]

Thanks Jeanette,
I think I'll order one tomorrow and maybe one of those cables too.

[Joe Pelonio]

I can't remember but if it was over $250 I would remember!

At least it was a pretty easy job to change out.The replacement was reinforced to last a lot longer, the original got a bent shaft from stress.

[Dan Hintz]

the original got a bent shaft from stress.
I've had a few days like that...

[Martin Boekers]

I think mine was about $150 but don't forget the core charge which you will get back when the core is sent in.


Marty

[Bill Cunningham]

The 150 sounds about right.. I replaced mine last year (you can smell them cooking:D) But the shipping was $50.00.. Not complaining though, I called Epilog about 10am, and the part was in my machine by 1pm the following day, and I'm 3000 miles away..