John Edwards
12-07-2004, 2:08 PM
Making a couple of Shaker clocks based on Norm`s design. Pretty simple stuff with lots of little parts.
Used the DS400/CT22 for the first time. What a nice, comfortable tool too use. No dust, smooth finish and the pointed end allows you to get into some tight corners. The variable speed came in handy for some of the smaller pieces.
If you have been on the fence about buying one of these, do it ! It truly belongs on everybodys shop.
Tried the 125 but found it to be a bit more aggresive then I wanted for such a small project.
BTW, Thanks Uncle Bob !!
Used the DS400/CT22 for the first time. What a nice, comfortable tool too use. No dust, smooth finish and the pointed end allows you to get into some tight corners. The variable speed came in handy for some of the smaller pieces.
If you have been on the fence about buying one of these, do it ! It truly belongs on everybodys shop.
Tried the 125 but found it to be a bit more aggresive then I wanted for such a small project.
BTW, Thanks Uncle Bob !!