PDA

View Full Version : Identifying a vise.



Tim Cottle
07-29-2010, 8:41 AM
This is a duplicate of a post in the Gen WWking forum, someone there suggested I post it over here.

I know alot of you have seen and been around some old hardware.
I procured this vise from a friend, and now I am wondering if anyone has any information on it. Someone in the other thread mentioned that it looks like a vise that studley used on his bench. These pictures I have attached were hastily taken in the AM, but on one side where there is a cutout, the are some threaded holes.

Thanks
http://www.sawmillcreek.org/picture.php?albumid=387&pictureid=3727Alot http://www.sawmillcreek.org/picture.php?albumid=387&pictureid=3726