View Full Version : Wanted: Switch and outlet plate vector files

James Terry
07-29-2010, 2:14 AM
I could use some art for standard wall switch plates if anybody has something lying around.

George M. Perzel
07-29-2010, 6:31 AM
Hi James;
Here ya go
Best regards;

James Terry
07-29-2010, 2:13 PM
Thanks, I'll give this a try. I'd like to surprise mom with a custom dog relief switchplate. I'm going to use the laser for everything since I do not have any other tool, so I guess I will taper the screw holes using different power settings and concentric circles.

Chris DeGerolamo
07-29-2010, 2:57 PM
I think it might be more aesthetically pleasing if you mark where the holes should go with a rastered crosshair or circle and drill them out with a countersink bit. Just my 2c.