View Full Version : Alumacore Cutting
Peter Meacham
07-27-2010, 8:40 AM
I am being offered a job cutting Alumacore and .25 PVC for real estate signs.
I have not worked with these products before - Any special bits and feeds/speeds required with either of these products?
Any assistance appreciated.
Pete
Scott Shepherd
07-27-2010, 9:09 AM
It cuts like butter. I personally like the O-flute bits for this type product.
Joe Pelonio
07-27-2010, 3:39 PM
It cuts like butter. I personally like the O-flute bits for this type product.
Yes, both products do. Just watch out for the static generated causing the chips/dust to stick on everything.
Peter Meacham
07-27-2010, 4:01 PM
Thanks Scott. I will try that bit.
Peter Meacham
07-27-2010, 7:53 PM
Thanks for the inputs.
I misread Scott's comment, I thought he said cut WITH butter - what a mess my table is now!!!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.