PDA

View Full Version : laserpro rotary size



Niklas Bjornestal
07-20-2010, 12:16 PM
I'm away from my laser for a couple of days and i need to get the size of the rotary device for laserpro mercury engravers. The measurments i need is the thickness and width of the bottom plate, and also the distance from the bottom plate to the center of the drive wheel. A, B and C in the attach sketch

Chuck Stone
07-20-2010, 2:06 PM
I'm away from my laser for a couple of days and i need to get the size of the rotary device for laserpro mercury engravers. The measurments i need is the thickness and width of the bottom plate, and also the distance from the bottom plate to the center of the drive wheel. A, B and C in the attach sketch

Bottom plate on mine is 5.912" wide x .42" thick
From the top of the base plate to the drive center is 3.746"

Niklas Bjornestal
07-20-2010, 3:14 PM
Bottom plate on mine is 5.912" wide x .42" thick
From the top of the base plate to the drive center is 3.746"

Thank you :)

Chuck Stone
07-20-2010, 3:56 PM
No problem. I'm just glad I finally found a question that I could answer! :p