Unisaw splitter

[sullivan mcgriff]

Picked up what I was told was a disapearing splitter for a unisaw, but the holes in it are offset while the holes in my saw(34-450) are vertical. Is something missing or did I not get what I thought I did ?

[Ray Newman]

Can you post a picture of the part?

I have a circa 1988 Unisaw with the 34-885 Uniguard and disappearing splitter. I "upgraded" the Uniguard to the newer model as the original was damaged during a move, but left the old style disappearing splitter on the saw. It is very handy and easy to push down below the table when not needed.

Parts schematic for Delta 34-885 Uniguard Type 1:
http://www.toolpartsdirect.com/cgi-bin/schematic.cgi/delta/34-885_TYPE_1/

Possible source for parts:
http://www.sawcenter.com/

[sullivan mcgriff]

my camera is u/s but here is a link to a pic
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=220626310486&ssPageName=STRK:MEWNX:IT
My saw has the holes vertical, this one is offset