Display cabinet for dolls

[Eduard Nemirovsky]

I am building display cabinet for my wife collections. All sides and front doors will be glass in frames.
Because of total height of cabinet - 70", I am start worry flimsiness:confused: of the door frame. My plan is 2" wide stiles and rails.
I make one door' frame without glass and think it may be to light for load of glass:confused:
Would you please, tell me what you think.

[Harvey Ghesser]

Ed,

I don't think you'll have any problems as long as your door frame thickness is a full 3/4 inch, and you use hardware which will support the weight of the door and glass. Yes/no?

[Eduard Nemirovsky]

Hi Harvey, did not seeing you for a long time. How are you?

yes, frame is 3/4" , and after posting this question, I made an all four doors. To my surprise it is not fill flimsy. Will see when I will add a glass to it.
Ed.

[Harvey Ghesser]

Hi Ed,

I'm sure that 3/4 inch thickness will be adequate support for the glass. I built a similar cabinet years ago and had no problem.

I'm fine! Just have an addiction to the lathe. Don't get started! (my best advise to you!)

Hope to see you soon!

Harvey