Plastic sign on glass door...

[Linda Kroeker]

I have a couple of plastic signs that a customer would like put on a glass door.
Would I just use my normal double stick tape that I use for most plastic signs?
They asked if silicone would work on glass...???
Any suggestions?

Thank you,
Linda

[Scott Shepherd]

Double stick tape is fine. It's also nice to make a piece to go on the other side of the glass to cover the piece and the tape.

[Joe Pelonio]

Double stick tape is fine. It's also nice to make a piece to go on the other side of the glass to cover the piece and the tape.
Yes, I installed several hundred ADA signs on glass and then put blank black 1/16" ABS the same size on the other side to hide the ugly strips of tape. They do have a decent black 1" DS tape (Cheap) at Harbor Fright that works fine for this. No need to waste expesnive 3M VHB on glass and glossy plastic.

[Linda Kroeker]

Thank you Scott and Joe...that is what I thought I would do...with the extra piece.

[Ross Moshinsky]

There are a few other alternatives...

Suction cups work well. You can also use lamination tape to cover the whole backside of the plastic which has a benign look to it. Another option is integrating ball chain to hang from a point above.