Does Incra PRL-V2 with 350 pads work with Ridgid router

[Mike Nguyen]

Hi, I have a Ridgid R2930 router which is compatible with Porter Cable 690 and 890 in regards to router plates from Incra, Woodpeckers... I want to know if anyone has used the Incra PRL-V2 with the Ridgid router with the 350 pads. I already have the bigger Triton on my router table so this combination of the Incra PRL-V2 and the Ridgid would go to my table saw right extension wing. Mark at Incra said that the motor diameter has to be 3.5" but when I measured the Ridgid, its diameter is about 3.611. I am not sure it would work.
Thanks
Mike

[Will Overton]

My guess is yes based on the way the router is clamped into the lift. However, you should call WoodPecker, they make them, and tell them what you told us. It doesn't sound like you told Mark that the diameter is about 3.611.