Does Jet Sell a TS splitter...

[Tom Gattiker]

like the $29 from delta for contractor saws? If I were making the Jet vs Delta decision again, this might be a scale tipper towards delta. Seems like Jet would introduce one just to keep up.

[Stan Smith]

Biesemeyer makes one for Jet. I have the Jet ts and bies splitter. It just lifts in and out and is held in with a spring knob. very handy.

[John Wadsworth]

...and like it a lot. If I recall correctly, Kelly Mehler's FWW article on after-market TS guards and splitters found only the Bies available for non-Delta saws. (Mine's on a PM66).

Wasn't no $29, though...

[Bill Esposito]

Here's a link to my write-up on the biese splitter on a Jet contractors saw.

http://cerealport.net/woodworking/biespliter.html

[JayStPeter]

It helped tip the scales for me. That was a $70 positive for the Unisaw because I knew I'd get a splitter. With the mobile base included on the Limited Edition and a show special, the Unisaw came out cheaper than the Jet when equipped as I wanted it.