Brian Runau
06-28-2010, 1:01 PM
I am working on trying to wind up with some 2 x 2 stock for chair legs from Cypress.
I can buy 2 x stock that is really 1-3/4 so I need to buy and glue up then cut down to get my true 2 x 2.
2 x 4's won't work so I thought to go to 2 x 6, glue up then get 2 pcs
2 x 2 from each glue up. The glue up would be 5-1/2" x 3-1/2".
Looking for suggestions on a way to do this that has less waste?
Thanks.
Brian
I can buy 2 x stock that is really 1-3/4 so I need to buy and glue up then cut down to get my true 2 x 2.
2 x 4's won't work so I thought to go to 2 x 6, glue up then get 2 pcs
2 x 2 from each glue up. The glue up would be 5-1/2" x 3-1/2".
Looking for suggestions on a way to do this that has less waste?
Thanks.
Brian