Bart Leetch
11-30-2004, 2:22 AM
I need to know what the measurement from the bottom of the sheet metal case where it sets on top of the legs to the top surface of the top is.
The reason is I want to use my base cabinet & hope that it will match the height of my current saw or maybe be just a bit taller.
Is the throat plate a thin plate like the Craftsman throat plates, or is it similar to other throat plates 1/2" thick around the edge.
You can see the base cabinet I want to keep here.
http://bartswoodshop.freeservers.com/photo.html
It does have pop ups but it is free.
Thanks, Bart
The reason is I want to use my base cabinet & hope that it will match the height of my current saw or maybe be just a bit taller.
Is the throat plate a thin plate like the Craftsman throat plates, or is it similar to other throat plates 1/2" thick around the edge.
You can see the base cabinet I want to keep here.
http://bartswoodshop.freeservers.com/photo.html
It does have pop ups but it is free.
Thanks, Bart