Replacement parts for incra miter express

[Aaron Wingert]

I've got an Incra miter express sled that I use on the table saw. I just got a new table saw and the distance between the blade and the miter bar isn't the same, rendering the miter sled less than ideal since it was cut to fit my last saw. I'm curious if anyone sells just the replacement laminated mdf piece to replace the piece that fits between the miter bar and the blade?

Otherwise I'm going to have to get creative with some 1/2" MDF, but I would really prefer to buy a replacement....So everything matches color (yeah, I know. Silly, but it is what it is). :D

[Ken Fitzgerald]

Incra does. I just checked their website.

[Aaron Wingert]

Thanks Ken, I'll have to check again. I must have missed it!

[mike holden]

Aaron,
The incra jig pieces, the ones with all the holes predrilled, work nicely. For $15 I got a piece that fit and the cutoff is ready for making another jig out of. The new piece is the off-white of the jigs rather than a matching red, but that doesnt affect the function.
Mike

[Bill Wyko]

The folks at Incra are the best hands down. They will be able to fix you up.

[Mark Woodmark]

The folks at Incra are the best hands down. They will be able to fix you up.

+1 on that. They have sent me replacement wear parts free of charge

[Gary Muto]

FYI, Rockler and Woodcraft (at least my local stores) stock the replacemetn panels. Actually I think they pretty much have all of the components.