Dave Gaul
06-15-2010, 9:48 AM
Not an awesome Veritas Twin Screw by any means, but until I make a proper bench, and the fact that I got the hardware for $10, this will do for now!
The faces are from some scrap Red Oak I had from a project, 3/4" thick with all edges chamfered, no finish on them, should I finish them?
I give on trying to upload the second pic!! Here is a link!
http://www.flickr.com/photos/51223369@N08/4703002683/
I know it's nothing fancy, but it is better than clamping various blocks to the underside of the bench to have something to clamp pieces to!
The faces are from some scrap Red Oak I had from a project, 3/4" thick with all edges chamfered, no finish on them, should I finish them?
I give on trying to upload the second pic!! Here is a link!
http://www.flickr.com/photos/51223369@N08/4703002683/
I know it's nothing fancy, but it is better than clamping various blocks to the underside of the bench to have something to clamp pieces to!