Tim Null
06-14-2010, 12:54 PM
My prior thread was to give reviews on 12" disc sanders. I got a bit of a mixed bag. Everyone agrees that the Jet is great, but pricey. Some say the Delta and Rikon are fine, some say not.
I plan on doing a lot of small work, boxes etc. I have the Rigid OSS, so I was thinking of the small Sand Flee and the Rikon. My thoughts are to be able to dine tune the small parts using these three.
Can all of the Rikon owners give my their opinions? Anyone have a problem with runout. To fine tune miter edges, it should be very minimal. I have heard some say it is fine and others say to much to be acceptable.
I would really appreciate your comments.
Thanks,
Tim
I plan on doing a lot of small work, boxes etc. I have the Rigid OSS, so I was thinking of the small Sand Flee and the Rikon. My thoughts are to be able to dine tune the small parts using these three.
Can all of the Rikon owners give my their opinions? Anyone have a problem with runout. To fine tune miter edges, it should be very minimal. I have heard some say it is fine and others say to much to be acceptable.
I would really appreciate your comments.
Thanks,
Tim