Karl Card
06-12-2010, 7:39 PM
I turned this pen today using some kind of wood I found laying around...
I turned it down, sanded down to 600, while turning on lathe i put 2 coats of amber shelac on it, sanded with 600 again, 4 coats of blo and titebond ca thick glue and 2 coats of renaissance wax. Copper hardware.
I turned it down, sanded down to 600, while turning on lathe i put 2 coats of amber shelac on it, sanded with 600 again, 4 coats of blo and titebond ca thick glue and 2 coats of renaissance wax. Copper hardware.