Molding head in a Sawstop

[Jay Jolliffe]

Can you use a molding head in the Saw stop? Also can you use the Freud SD608 dial a width with the saw?

[Will Overton]

No on molding head cutters. Not sure about Freud SD608.

I know the info on the molding head is in the owners manual which you can download from SawStop.com .

[Thomas L. Miller]

Jay,
Yes you can use one. I have one and it works fine on my ICS. You do need to use the dado cartridge, however but that goes without saying.

[J.R. Rutter]

The Magic Moulder is too small for the dado cartridge to work (on my older industrial saw). I made a workaround using some very heavy gauge copper wire screwed into the dado cart. and looped up to the arbor to pick up the eddy current. Desperate times and all . . .

[Darrell Bade]

Not sure about the moulding head.

The Freud SD608 will work. That is what I have and it is a great dado set. You do need to leave the washer off and use the nut only on the arbor.