PDA

View Full Version : color fill for romark material



greg lindsey
06-02-2010, 2:10 PM
anyone have a idea for paint for romark material. I need to backfill some white lazermax material with red and green letters, but I haven't found these colors from sites like Laserbits. Looking for ideas. Thanks.

Gary Hair
06-02-2010, 2:13 PM
I would get some acrylic paint from any local craft store. I have used it many times on acrylic and I'm pretty sure it would work fine on Rowmark.

Gary

John Noell
06-02-2010, 2:42 PM
I agree with Gary; that's what I use. However, I've also used solvent-based paints on it with no problems (unlike using it on plexi/pex acrylic).

greg lindsey
06-04-2010, 2:01 PM
Thanks for the info guys, I went to Hobby Lobby and picked up some acrylic pens and masked the parts and filled, worked like a charm. Sounded like a dumb question, but it's not part of my routine to backfill parts.

John Noell
06-04-2010, 3:12 PM
I hear very few dumb questions. Naive sometimes, but not dumb. On the other hand I hear a LOT of dumb answers. :)