PDA

View Full Version : GCC Venus Laser



George M. Perzel
05-29-2010, 11:59 AM
Hi Gang;
Anyone have an operating manual for a GCC (Laserpro) Venus-preferably a pdf or Word doc? Thanks
Best regards;
George
LaserArts

Rodne Gold
05-29-2010, 1:40 PM
Try Jorlink.com

Viktor Voroncov
05-30-2010, 4:16 AM
Here is Mercury manual http://www.litografa.lt/index.php?aid=138
Practically the same as Venus.
If you need EXACTLY Venus manual due mechanical issues - PM me your mail - I will send you.

George M. Perzel
05-30-2010, 5:58 AM
Rodne
Thanks- did check them out online but nothing there-will call them Tuesday.

Victor;
Thanks- I do have the Mercury manual as I have a Mercury and am getting two Venus units (used). What are the differences between them with regard to operation, maintenance, etc. I appreciate your help.
Best regards;
George
LaserArts

Viktor Voroncov
05-30-2010, 10:33 AM
As you know Venus is Mini-Mercury and was created as answer to 1998 financial crisis. So everything is practically same in terms of operation. There is some difference mostly connected with table/Z-axys movement and air extraction. If you worked in past with Mercury - will be no problems start with Venus. I have Venus manual but can't put here as zip file is over 4 Mb