Brian Greb
05-28-2010, 3:04 PM
Hey guys,
It's been a while since I have posted here... and well I have been busy. here are my most recent pieces... I have been on a platter kick.:D
The first two pictures are of the top and bottom of a Bloodwood platter with Maple, Ebony, and aluminium inlays. It is 9" in diameter, and 5/8" thick at its thickest point.
Pictures 3 and 4 are of the top and bottom of a Royal ebony and Eucalyptus platter with Ebony, Holly, aluminum, copper, and brass inlays... the bottom of the plate is maple. It is 12" in diameter, 3/4" tall, and 3/8" thick.
Pictures 5 and 6 are of the top and bottom of a Purpleheart and Maple platter, with Purpleheart, Holly and aluminium inlays. It is 11 7/8" in diameter 5/8" tall and 3/8" thick.
All are finished with blo and friction polish then hand buffed.
Thanks for looking and as always C&C are welcomed and encouraged.
It's been a while since I have posted here... and well I have been busy. here are my most recent pieces... I have been on a platter kick.:D
The first two pictures are of the top and bottom of a Bloodwood platter with Maple, Ebony, and aluminium inlays. It is 9" in diameter, and 5/8" thick at its thickest point.
Pictures 3 and 4 are of the top and bottom of a Royal ebony and Eucalyptus platter with Ebony, Holly, aluminum, copper, and brass inlays... the bottom of the plate is maple. It is 12" in diameter, 3/4" tall, and 3/8" thick.
Pictures 5 and 6 are of the top and bottom of a Purpleheart and Maple platter, with Purpleheart, Holly and aluminium inlays. It is 11 7/8" in diameter 5/8" tall and 3/8" thick.
All are finished with blo and friction polish then hand buffed.
Thanks for looking and as always C&C are welcomed and encouraged.