PDA

View Full Version : Yorkcraft Lathe, YC-900WL


Dennis Mann
05-25-2010, 5:45 PM
I obtained the above lathe at an auction. Didn't get any instructions. Does anyone have one of these? I need to know the speeds for the various speed control lever positions. I went to Wilkie here in York, PA. They do not have a copy of the manual. Your help would be greatly appreciated.

Thanks
Nathan Hawkes
05-25-2010, 10:07 PM
Check out www.owwm.com (http://www.owwm.com) (old woodworking machines.com) for your machine. It is a tremendous resource!
Ted Jay
05-25-2010, 10:37 PM
I obtained the above lathe at an auction. Didn't get any instructions. Does anyone have one of these? I need to know the speeds for the various speed control lever positions. I went to Wilkie here in York, PA. They do not have a copy of the manual. Your help would be greatly appreciated.

Thanks

This was all I could find with a quick search:

http://www.sawmillcreek.org/attachment.php?attachmentid=151513&stc=1&d=1274841206

Hope that helps a little to give you a range of speeds it has.

Ted