PDA

View Full Version : Cheap but effective pin table



Dave Russell Smith
05-23-2010, 9:10 PM
Went to our local hardware store and bought a box of aluminum Pop Rivets and put them in my vector grid and the rest is history. It works its cheap :D

Allen Isakson
05-23-2010, 9:23 PM
great idea Dave. I use golf ball tee's, point down that also works great in my table very stable.

Dave Russell Smith
05-23-2010, 9:27 PM
great idea Dave. I use golf ball tee's, point down that also works great in my table very stable.

Thats what I started out with but I found I was still getting a little flash back from the laser on the Acrylic because they sit low to the table :mad:

Tim Bateson
05-24-2010, 1:11 AM
Very innovative. Thanks for the idea.

David Hartstone
05-24-2010, 3:36 AM
I use plastic clothes pegs with a flat top; they are very stable, easy to apply and best of all they work.;)

Adam Orton
05-25-2010, 12:56 AM
I used some number 10 flat head wood screws about an inch long and I glued magnets on the heads. I stick em to the stainless top and I can move them without tipping and the pointy ends keeps things from sliding about. Works really well..