I need a quick measurement off a Mini-max fs30 smart.

[Tom Rick]

Anyone near enough to their shop to give me a footprint measurement?

I am trying to draw up some shop floor plans & don't know how wide the machine is..

Thanks all

[John Morrison60]

Tom

Here they are:

19" deep by 26" long at the floor

20" by 67" at Jointer surface. (length includes fence adjustment knob)

+13" depth for mortising attachment.

5" DC connection on right side 30" from floor

jointer surface is 36" from floor when in HTC mobile base.
About 34+ inches if no mobile base.

Electrical connection for power cord is on right side, near front.

Overall hight in Jointer mode is 43" including fence.

Note that I have removed the backside blade protector to give me closer-to-wall placement.



I hope this is the info you needed.
John

[Tom Rick]

Thanks very much for the thorough answer!

That does the trick.

[Tom Rick]

John,

Any chance you can give me one more measurement?

I need how high the planer bed surface is off the floor when in lowest position.

Thanks much