View Full Version : I need a quick measurement off a Mini-max fs30 smart.
Tom Rick
05-23-2010, 1:22 PM
Anyone near enough to their shop to give me a footprint measurement?
I am trying to draw up some shop floor plans & don't know how wide the machine is..
Thanks all
John Morrison60
05-23-2010, 2:25 PM
Tom
Here they are:
19" deep by 26" long at the floor
20" by 67" at Jointer surface. (length includes fence adjustment knob)
+13" depth for mortising attachment.
5" DC connection on right side 30" from floor
jointer surface is 36" from floor when in HTC mobile base.
About 34+ inches if no mobile base.
Electrical connection for power cord is on right side, near front.
Overall hight in Jointer mode is 43" including fence.
Note that I have removed the backside blade protector to give me closer-to-wall placement.
I hope this is the info you needed.
John
Tom Rick
05-23-2010, 4:09 PM
Thanks very much for the thorough answer!
That does the trick.
Tom Rick
05-27-2010, 7:48 PM
John,
Any chance you can give me one more measurement?
I need how high the planer bed surface is off the floor when in lowest position.
Thanks much
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.