View Full Version : Spindle Size on this Lathe?
Sean Ackerman NY
05-20-2010, 4:54 PM
Anybody help me out? Can't find the size.... http://www.rockler.com/product.cfm?page=19446
Brian Effinger
05-20-2010, 5:03 PM
I would bet it is 1 x 8 or 3/4 x 16. If someone else doesn't know, I'll take a look at my local Rockler when I go in the next day or two.
Jeff Willard
05-20-2010, 5:21 PM
Heh. If the manual doesn't supply the info, that one might be best avoided. Or alternatively, Rockler should know.
If not, see above.
Joe McMahon
05-20-2010, 5:25 PM
Anybody help me out? Can't find the size.... http://www.rockler.com/product.cfm?page=19446
I have the same lathe that I bought used and was wondering the exact same thing. When you find out, please let me know as well.
Joe McMahon
05-20-2010, 5:29 PM
If "Ken" at my local Rockler can be believed, it is 1 X 8
Sean Ackerman NY
05-20-2010, 5:37 PM
If "Ken" at my local Rockler can be believed, it is 1 X 8
Hmmmmm, can anybody vet for this so called "Ken?" Lol
A customer was curious what size spindle is on the lathe, wants to take advantage of a chuck sale, but isn't quite sure if the chuck will fit. Strange it's not mentioned at all on the site. Leads me to believe probably a 3/4 x 16
Andrew Kertesz
05-20-2010, 6:01 PM
I thought I saw a post on another site that said it was 3/4 x 16
Joe McMahon
05-20-2010, 6:15 PM
I just called Rockler technical support and they say 1 X 8
John Merc
05-20-2010, 6:42 PM
I owned one of those before Rockler gave me my money back after replacing the motor twice. It is 1 x 8, but I would look for a different brand.
Thom Sturgill
05-20-2010, 8:46 PM
One of the 'reviewers' said it is MT2 which would make me think 1x8 as most of the 3/4" I've seen are MT1
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.