Victor Robinson
05-09-2010, 1:32 PM
I finally got around to installing the riser block for my G0555. I can't get the darn blade onto the wheels and feel like such an idiot. The saw is completely detensioned (by lever and by knob) and the blade just won't fit around the wheels...I'm not able to force it. Is there something I'm doing wrong or a trick I'm missing?
Or is the blade they sent with the riser a half-inch too short? It's my only 105" blade at the moment and I wanted to make a few rough cuts today - may as well see if the 105" Woodslicer I've got coming on Monday gives me the same problem...
Or is the blade they sent with the riser a half-inch too short? It's my only 105" blade at the moment and I wanted to make a few rough cuts today - may as well see if the 105" Woodslicer I've got coming on Monday gives me the same problem...