Alan Lightstone
05-09-2010, 8:22 AM
In the process of building cabinets with drawers to store nuts, bolts, other crap in my workshop. Already have two sets of dividers made for drawers. They are a pretty snug fit with the 1/4" stopped dado joints.
My question is, should I glue the divider assembly to the bottom of the drawer and together(making it unchangeable), or is there another approach? What I don't want is the dividers lifting up sending screws, nuts etc. underneath the dividers mixing all together.
My question is, should I glue the divider assembly to the bottom of the drawer and together(making it unchangeable), or is there another approach? What I don't want is the dividers lifting up sending screws, nuts etc. underneath the dividers mixing all together.