PDA

View Full Version : Chipped Frog, Okay or Replace?



Justin Chen
04-24-2010, 7:52 PM
I'm pretty new to hand planes and bought this Stanley Bailey #5 off ebay. The frog is chipped, should I buy a replacement frog or can I keep this one?

Jim Koepke
04-24-2010, 7:59 PM
Justin,

Welcome to the Neander Cave by the Creek side.

If the sets solid without rocking before installing the screws, you should be OK. If the frog rocks more than a little, you will be better off with a replacement.

If it rocks a little, you may be able to remove some metal to correct the rocking.

When I was young I would love to rock out, but our frogs shouldn't.

Have you checked this thread?

http://www.sawmillcreek.org/showthread.php?t=114373

jim

James Taglienti
04-24-2010, 8:01 PM
+1 on whatever jim just said :)

Justin Chen
04-24-2010, 8:04 PM
Justin,

Welcome to the Neander Cave by the Creek side.

If the sets solid without rocking before installing the screws, you should be OK. If the frog rocks more than a little, you will be better off with a replacement.

If it rocks a little, you may be able to remove some metal to correct the rocking.

When I was young I would love to rock out, but our frogs shouldn't.

Have you checked this thread?

http://www.sawmillcreek.org/showthread.php?t=114373

jim

Thanks for the info, I found that thread earlier and have read parts of it. It'll a helpful reference while I restore this plane.

Good news is that the frog seems to be pretty stable, whew I hate spending more $$$.

BTW are the Bailey #5's pretty good users after restoration/fettling? I have a Bailey #3 that I did some restoration and seems to be working pretty well so far.

Derek Noel
04-24-2010, 8:09 PM
Ahaaa... yes, X=35. Interesting

Jim Koepke
04-24-2010, 8:16 PM
Thanks for the info,

[snip]

BTW are the Bailey #5's pretty good users after restoration/fettling? I have a Bailey #3 that I did some restoration and seems to be working pretty well so far.

You are welcome.

I sure hope the #5s good users. There are now 4 of them in my shop. I only plan to keep two of them though. They were one of the work horses of the Stanley/Bailey bench planes. They are often referred to as a "Jack Plane," because they are a "Jack of all trades" kind of plane.

jim

David Christopher
04-24-2010, 8:33 PM
http://www.sawmillcreek.org/picture.php?albumid=347&pictureid=3360# 5s are good users