View Full Version : cant find excalibur blade guard
Robert gree
04-21-2010, 11:26 PM
I can not find the ceiling mounted Excalibur blade guard anywhere, Am i just blind?
Van Huskey
04-21-2010, 11:31 PM
Actually, I have never been able to find them online either. Try emailing or calling tools-plus, they carry General and carry the over-arm gaurd so they should be able to get the ceiling mount version.
Robert gree
04-21-2010, 11:36 PM
Actually, I have never been able to find them online either. Try emailing or calling tools-plus, they carry General and carry the over-arm gaurd so they should be able to get the ceiling mount version.
Should be cheaper than the regular version also
Brian Backner
04-22-2010, 6:35 AM
You could also build your own version:
http://www.woodcentral.com/bparticles/overarm_guard.shtml
Brian
Taxachusetts
Thomas Hotchkin
04-22-2010, 10:58 AM
You could also build your own version:
http://www.woodcentral.com/bparticles/overarm_guard.shtml
Brian
Taxachusetts
I built a version of this and it works great. Tom:)
Sean Nagle
04-22-2010, 12:34 PM
I have an older Excalibur blade guard that I've successfully mounted to my 9' ceiling. I was able to use the floor post without modification, just adjust it to the proper height. I think it just worked perfect for the 9' ceiling height. 8' or 10' ceilings would have issues. But again, this is the older model, the newer one might have a different mounting post.
Rod Sheridan
04-22-2010, 1:06 PM
I can not find the ceiling mounted Excalibur blade guard anywhere, Am i just blind?
http://www.general.ca/pg_index/manuals/50excb-CM10-14e.pdf
That's the manual from the General site for the EXBC-CM10 and CM14 guard.
(Ceiling mount guard for 10" and 14" blades.)
You can order them through your local General retailer..........Regards, Rod.
Robert gree
04-22-2010, 1:10 PM
http://www.general.ca/pg_index/manuals/50excb-CM10-14e.pdf
That's the manual from the General site for the EXBC-CM10 and CM14 guard.
(Ceiling mount guard for 10" and 14" blades.)
You can order them through your local General retailer..........Regards, Rod.
i meant i couldnt find them online, Found a local guy that has a the 14" model for 195.:)
Hank Knight
04-22-2010, 1:15 PM
Robert,
I just ordered the ceiling mounted Excalibur guard from General International. It's in their catalog at: http://www.general.ca/site_excalibur/e_produits/50-exbce.html The part number is: 50-EXBC-CM14. It is considerably cheaper than the table mounted version. My local tool dealer had a tool show recently and the General rep was there. I got him to look it up in the catalog for me and I ordered it through my dealer.
Hank
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.