Mark Ross
04-05-2010, 3:03 PM
Seriously being asked to get a quote on either a pass through (DO NOT WANT)...or a 4' by 8' work area laser (MOST DEFINITELY DO WANT...Drool Drool).
Saw this one...http://www.jamiesonlaser.com/lasersys/LC1225/LC%20Features.htm
Wondering if anyone out there has experience with any large work surface lasers.
Between the time we spend cutting down 4 X 8 sheets and the increase in material utlization (less scrap), I am pretty sure I can justify one of these machines, I just have to write up a proposal.
Not to mention I could do some wicked cool 4 X 8 mirrors for the house! (Did I say that?).
We would keep the Epilog 36EXT for those "small" jobs, but for 95% of our commercial/industrial work, the large scale would be wicked...plus we'd help stimulate the economy...
Saw this one...http://www.jamiesonlaser.com/lasersys/LC1225/LC%20Features.htm
Wondering if anyone out there has experience with any large work surface lasers.
Between the time we spend cutting down 4 X 8 sheets and the increase in material utlization (less scrap), I am pretty sure I can justify one of these machines, I just have to write up a proposal.
Not to mention I could do some wicked cool 4 X 8 mirrors for the house! (Did I say that?).
We would keep the Epilog 36EXT for those "small" jobs, but for 95% of our commercial/industrial work, the large scale would be wicked...plus we'd help stimulate the economy...