Which McFeely's assortment to get?

[Rich Engelhardt]

I mostly use #8 & #6 phillips in 1" to 3" lengths.

I recall a numer of people mentioned getting the McFeely's assortment, which, IIRC, comes with a bin?

I looked at their site and found a number of different assortments.

I'd like to go with square drive if possible.

Can anyone point me in the right direction?
TIA!

[Joe Chritz]

Can't help you with the assortment but here is what I do.

I always buy screws in 1000 boxes. A one time order of 60-100 dollars and I am set for a long time.

The last time I ordered I got several boxes from Custom Service Hardware. (Zinc assembly screws with a #17 cutting point and countersink nibs). The cost is the same for 230 screws as 1000. There is a big price break at the box and case levels. I then just write on the box with a sharpie and instant storage.

I assume McFeeley's is similar but it has been a while since I ordered any from them.

Joe