Loren Hedahl
04-02-2010, 2:07 PM
Kitchen remodeling in-process. Existing back splash and behind counter walls were 1 x 1 white mosaic ceramic tile glued to 3/8 ply underlayment. These are now removed and the glue residue sanded down to bare wood.
I have a large stash of #3 common ash that has a lot of character for cutting into mosaic tile size, say 3/4 x 3 inch. Rough cut now, it could be planed to 7/8 inch thick, sawn into 3/4 inch strips then resawn to approx 3/8 inch thick on a band saw and cut to 3 inch lengths.
Just wondering if anyone has done this -- and have any recommendations.
I'll even accept, "You must be insane!" :>)
I have a large stash of #3 common ash that has a lot of character for cutting into mosaic tile size, say 3/4 x 3 inch. Rough cut now, it could be planed to 7/8 inch thick, sawn into 3/4 inch strips then resawn to approx 3/8 inch thick on a band saw and cut to 3 inch lengths.
Just wondering if anyone has done this -- and have any recommendations.
I'll even accept, "You must be insane!" :>)