RAFAEL GUERRI
04-01-2010, 4:14 PM
Hi, I´ve post this in the signage forum but I´ve had no answer so far.
I´ d like to know if someone has already try to make flat lights.
These lights are also called Led slim panels and i think the best ones are made by Fawoo. The issue is that they have a sort of "v cutting" engraving like a grid and others a dot pattern. The other fact is that they use a very powefull slim led strip.
It seems like the grid v cutting is the key to achieve even ilumination.
So far I´ve tried whith Evonik Endlighten Acrylic, whith a laser engraved grid, but the results were not very impresive. I have also use a piece of Endlighten with dot pattern printed on both sides by UV printing, also with poor results.
My goal is to make A1 size panels with a minimun of 500 lux. in the middle.
I´m from Argentina and it seems that the biggest laser engraving machine available has a working area of 600 mm x 400 mm aprox.
I´ll appreciate any help.
Thanks in advance.
I´ d like to know if someone has already try to make flat lights.
These lights are also called Led slim panels and i think the best ones are made by Fawoo. The issue is that they have a sort of "v cutting" engraving like a grid and others a dot pattern. The other fact is that they use a very powefull slim led strip.
It seems like the grid v cutting is the key to achieve even ilumination.
So far I´ve tried whith Evonik Endlighten Acrylic, whith a laser engraved grid, but the results were not very impresive. I have also use a piece of Endlighten with dot pattern printed on both sides by UV printing, also with poor results.
My goal is to make A1 size panels with a minimun of 500 lux. in the middle.
I´m from Argentina and it seems that the biggest laser engraving machine available has a working area of 600 mm x 400 mm aprox.
I´ll appreciate any help.
Thanks in advance.